This page provides an overview of available guides.
Setup guide overview - Gateway Connect | A collection of guides that lead you step by step through the setup process. See below for the individual steps.
| Guide | Content |
|---|---|
| 1. Decide on System architecture | The main system architecture is explained and the two main deploment types are described. It is important to understand the differences as this will influence later steps for installation. |
| 2. Follow installation guide | The physical installation of the Gateway is covered, including connection of a powersupply, switch, charging stations, and internet access. |
| 3. Configuration of the Gateway | In some cases the Gateway must be configured before it can be used. This guide will take you through these steps |
| Extra. Advanced_Configuration Gateway Connect | Some networks require advanced setup. The options can be found here. |
GW_installation_guide | Installation guide for the legacy gateway.
GW_Power_Meter_Connection | Connection diagramm explaining the connection of a power meter.
| Guide | Content |
|---|---|
| 1. FLEXeCHARGE Platform Setup | Now that the Gateway Connect is up and running the FLEXeCHARGE Platform must be configured, charging stations connected to it and a CPMS must be setup. |
| 2. Clustering and Basic Load Management Setup | Clustgring is an important part of load management and clusters must be setup properly. |
| 3. Priortization of Charge Points | Charge points can be assigned a priority to make charging more effective. Follow this guide for more. |
| 4. Adaptive Charging Setup | Aaptive charging detects if an EV has finished charging. After that, the system will allocate no more charge current to that EV so that other EVs can charge with more charge current. |
| 5. Unbalanced Load Prevention Setup | Unbalanced Load Prevention is a safety feature. |
ALFEN Root Certificate | Alfen Chargers need to have up to date firmware to connect to the FLEXeCHARGE Platform.
ABB Root Certificate | When connecting ABB chargers via secure websocket (wss) connection, the FLEXeCHARGE root certificate has to be installed on the charger.